Lean Manufacturing and Lean Maintenance target the identification and elimination of waste through continuous improvement. The problem of under-maintaining assets is often addressed through loss elimination and continuous improvement programs. The problem of over-maintaining by comparison receives little attention. Left unattended the over-maintaining of assets silently and continuously squanders precious maintenance resources.
Industry has been conservative in its approach to setting preventive maintenance intervals. On some sites:
· 80 % of Preventive Maintenance costs are spent on activities with a frequency 30 days or less.
· 30 to 40% of Preventive Maintenance costs are spent on assets with negligible failure impact.
We now explore the impact of frequency on the over maintaining problem and proposes, with the use of a case study, low risk methods for reducing Preventive Maintenance costs. Keywords: Preventive Maintenance, Waste Elimination, Activities, Frequency, Analysis, Cost Reduction.
Buell and Smedley define Lean Manufacturing as “a systematic approach to identifying and eliminating waste through continuous improvement”. Waste is further defined as “anything that adds no value to the manufacturing process. Common sources of waste in manufacturing are identified (2) as:
· Overproduction – Producing product quantity in excess of requirement or demand.
· Inventory – Producing levels of end product or work in progress above the optimum.
· Waiting – Delays in the production process.
· Transportation – Transporting end product or work in progress unnecessarily.
· Motion – Unnecessary motion of workers, assets or materials associated with production.
· Processing – Redundant steps or activities in the production process.
Reducing the Cost of Preventive Maintenance
The application of the term “Lean” to maintenance similarly aims to target waste. Bever estimates that between 18% and 30% of every dollar spent on maintenance is wasted. Greg is reported as observing that maintenance operations may be wasting up to 25 percent of available labour and that up to 60 percent of this waste results from activities that add no value to the performance of the plant. Similar categories of waste identified for Lean Manufacturing can be applied to the exploration of Lean Maintenance. Building on a list developed by O’Hanlon, seven categories of waste in maintenance are summarised as follows:
· Overproduction – Performing preventive and predictive maintenance activities at intervals more often than optimal
· Inventory – Overstocking maintenance spares with slow moving parts and secret inventories.
· Waiting – Waiting for tools, parts documentation, transportation, etc.
· Transportation – Time spent walking, running, driving, and flying associated with maintenance work
· Motion –PM performed that adds no value to the prevention of downtime.
· Processing– Opportunity to improve the quality of repairs in reactive or breakdown maintenance.
· Defects – Asset failure caused by under-maintaining assets or maintenance rework.
Waste in maintenance can be considered as a problem of strategy, planning and control. This paper is specifically concerned with waste arising from strategic decision making. This particularly targets maintenance waste associated with “overproduction”, “inventory” and “motion” from the above list. These three topics are referred to specifically as over-maintaining.
THE PROBLEM OF OVER-MAINTAINING
Under-maintaining assets is characterised by:
· Preventive activities not performed or performed at too long intervals
· Ineffective or non-existent preventive activities
Under-maintaining assets leaves an evident waste trail as it often results in frequent and long breakdowns, high
levels of unplanned work and lost production and output. Under-maintaining is a regular target of continuous
Over-maintaining is characterised by:
· Performing preventive maintenance activities at more frequent intervals than necessary
· Performing preventive maintenance activities that add no value to the output
· PM activities are ineffective at detecting failure and are a waste of time
· PM Activities are redundant (i.e. duplicate other effort)
Over-maintaining assets leaves a less obvious waste trail. We are inclined to believe that our preventive maintenance activities are effective if we are not constantly rectifying breakdowns. When left unchallenged over-Reducing the Cost of Preventive Maintenance
In this paper, the term Preventive Maintenance refers to any activity that is designed to:
· Predict the onset of component failure,
· Detect a failure before it has an impact on the asset function,
· Repair or replace asset before failure occurs.
Preventive Maintenance has two features, an activity to be performed, and a frequency at which the activity is performed. A reduction in waste in Preventive Maintenance can target either the Preventive Maintenance activity or its frequency.
Preventive Maintenance Activities
In many businesses, Preventive Maintenance activities have been established over time with little technical discipline supporting the decision process. This has resulted in Preventive Maintenance
· Are ineffective in detecting the onset of failure,
· Duplicate the effort of other preventive activities,
· Are missing for critical failures.
A review of Preventive Maintenance activities requires an assessment of the modes and consequence of failure contrasted with the effectiveness of the proposed or actual activity. One method of performing a review of Preventive Maintenance activities is by hypothetical failure analysis. Analyses in this category develop Preventive Maintenance activities based on an analysis of failure risk.
Analyses in this category are typified by RCM II after Moubray (5), however there are many derivatives of this approach in practice. This type of approach generally ignores the existing Preventive Maintenance activities and compares results with existing maintenance programs after the analysis is complete. Hardwick and Winsor (6) describe the development of new maintenance standards for Energy Australia based on the application of RCM principles. Regarded as a successful technical and change management project, there were significant benefits estimated on 25000 Pole and Kiosk Substations. The traditional maintenance program had demanded an annual budget $6.875M per year. Typically $3.75M per year had been budgeted for, with the budget shortfall showing as work backlog. As a result of the project, new maintenance standards were developed. These changes did not affect the period or frequency of the preventive maintenance, but only the methodology or activities. The resulting maintenance program demanded a budget of $2M per year. With full implementation of the new program, a payback period for the project is estimated to be 4 months. This example clearly demonstrates the extent of the over-maintaining problem as well as the effectiveness of a successful review of preventive maintenance activities by hypothetical failure analysis. Another method of performing a review of Preventive Maintenance activities is a “Reverse RCM” process in which each activity is reviewed and tested for its purpose, value and possible duplication against other
A straw survey of industry supported by published maintenance frequencies shows a distinct preference for certain intervals when specifying Preventive Maintenance frequencies.
· Quarterly (3 Monthly)
· Semi Annually (6 Monthly)
This observation supports the contention that maintenance frequencies based on “personal judgement” are heavily influenced by monthly and annual calendar cycles. If each of these frequencies was extended by just one week most maintenance facilities could realise a 20% reduction in the direct cost of their Preventive Maintenance Program such as Maxpanda CMMS. If Preventive Maintenance activities are allocated to the preferred frequency intervals above in a conservative manner it is easy to imagine a situation for many activities of over-maintaining by a factor of up to 200%. The resulting over-maintaining adds little or no value to the detection or prevention of asset failure.
Impact of Preventive Maintenance Frequency on Reliability
It is assumed that as Preventive Maintenance frequency increases (i.e. the interval between Preventive Maintenance activities is reduced) the cost of performing the Preventive maintenance activity increases. It is also often assumed that the probability of failure reduces with increased Preventive Maintenance frequency. The relationship between Preventive Maintenance frequency and the probability of failure prevention (assumes that the Preventive Maintenance activity is successful and the penalty costs are avoided).
Probability of Failure
Effect of PM Frequency Reduction on Assets Reliability
The challenge associated with frequency reduction is that without reasonable failure data or history, it is difficult to know where the current Preventive Maintenance frequency sits on the graph. Reductions in the “Danger Zone” indicated in Figure 4, would result in proportional reductions in assets reliability. If the current maintenance frequency is low then significant reductions in reliability may not be apparent for some time. If the current maintenance frequency were high, then reductions in maintenance frequency within the “Danger Zone” would result in more Immediate reductions in reliability.
Frequency reduction may only be a reasonable strategy where the consequences of failure are
low and the current frequency is high. Minor reductions in maintenance frequency with these
characteristics can yield considerable returns as demonstrated in the following case study.
CASE STUDY – WASTE ELIMINATION THROUGH FREQUENCY REDUCTION
The following case study is from the manufacturing sector. The maintenance facility had recently conducted a review of their Preventive Maintenance activities, but backlog was continuing to climb as work was deferred. Site personnel were concerned that:
· Work backlog would rise to unmanageable levels,
· Critical Preventive Maintenance activities were being neglected in the deferred work
A further review of the Preventive Maintenance activities was considered to be of little value. For this reason it was decided to target the maintenance frequencies for possible reduction.
Reducing the Cost of Preventive Maintenance
Assets Criticality Rating: The criticality ratings were applied to individual Preventive Maintenance activities. The relative number of Preventive Maintenance activities in each of the Business Impact categories is shown. This chart shows that a high proportion of activities were directed at the prevention of “Negligible Impact” failures or failures with low levels of “Loss of Production” Safety / Environmental 22% Total Production Stopper 0% Partial Production Stopper 44% Negligible Impact 34%
Preventive Maintenance activities can have a significant impact on waste in maintenance and manufacturing as a result of both under-maintaining and over-maintaining. The problem of over-maintaining receives little attention by comparison with under-maintaining. The choice of Preventive Maintenance frequency impacts the total cost of the Preventive Maintenance program.
Conservative approaches to setting Preventive Maintenance frequencies increase maintenance waste while adding little or no value to the detection or prevention of asset failure.
The review of Preventive Maintenance activities has been shown in the past to effectively reduce waste caused by over-maintaining. A review of Preventive Maintenance frequencies offers further opportunities to reduce Preventive Maintenance effort. The reduction of Preventive Maintenance frequencies for high frequency activities on low criticality assets provides a method for quickly and effectively reducing Preventive Maintenance costs and eliminating maintenance waste.
Business Analyst – Maintenance PM WO mt
Maxpanda CMMS |email@example.com | https://www.maxpanda.com | +424-272-6675